1 power entry modules without line filter EC11 https://www.schurter.com /pg05 connectors iec appliance inlet c20 with line switch, 2-pole snap-in version or screw-on version illuminated version approvals and compliances c20 70 c description - panel mount : screw-on version from front or rear side, snap-in version from front side - 2 functions : appliance inlet protection class i , line switch 2-pole - quick connect terminals 6.3 x 0.8 mm characteristics - all single elements are already wired - unwired versions available on request - line switch non-illuminated or illuminated - ideal for application with high transient loads - suitable for use in equipment according to iec/ul 60950 other versions on request - unwired versions - line switch with other rocker marking - for protection class ii - variant with notch for v-lock mating cordsets references alternative: version with line filter ec12 weblinks pdf datasheet, html-datasheet, general product information, distributor- stock-check, accessories, detailed request for product, microsite newly available variants corresponding to v-lock mating cordset. the connector is equipped with a notch intended for use with the latching cordset. the cord latching system prevents against accidental removal of the cordset. technical data ratings iec 16 a / 250 vac; 50 hz ratings ul/csa 20 a / 250 vac; 60 hz dielectric strength > 2.5 kvac between l-n > 3 kvac between l/n-pe (1 min/50 hz) allowable operation tempe - rature -25 c to 70 c ip-protection from front side ip 40 acc. to iec 60529 insulation cover suitable for appliances with protection class i acc. to iec 61140 terminal quick connect terminals 6.3 x 0.8 mm panel thickness s screw: max 8 mm mounting screw torque max 0.5 nm snap-in: 1.5/2/2.5 mm material: housing thermoplastic, black, ul 94v-0 appliance inlet/-outlet c20 acc. to iec 60320-1, ul 498, csa c22.2 no. 42 (for cold conditions) pin-temperature 70 c, 16 a, protection class i line switch rocker switch 2-pole, non-illuminated or illuminated, acc. to iec 61058-1 technical details approvals and compliances detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in details about approvals
2 power entry modules without line filter EC11 https://www.schurter.com /pg05 connectors approvals the approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. approval reference type: EC11 approval logo certificates certification body description vde approvals vde certificate number: 40001031 ul approvals ul ul file number: e96454 cqc approvals cqc ccc file number: 2014010204683955 product standards product standards that are referenced organization design standard description designed according to iec 60320-1 appliance couplers for household and similar general purposes designed according to iec 61058-1 switches for appliances. part 1. general requirements designed according to ul 498 standard for attachment plugs and receptacles designed according to csa c22.2 no. 42 general use receptacles, attachment plugs, and similar wiring devices application standards application standards where the product can be used organization design standard description designed for applications acc. iec/ul 60950 iec 60950-1 includes the basic requirements for the safety of information technologyequipment. designed for applications acc. iec 60335-1 safety of electrical appliances for household and similar purposes. meets the requirements for appliances in unattended use. this includes the en - hanced requirements of glow wire tests acc. to iec 60695-2-12 and -13. compliances the product complies with following guide lines identification details initiator description ce declaration of conformity schurter ag the ce marking declares that the product complies with the applicable requirements laid down in the harmonisation of community legislation on its affixing in accordance with eu regulation 765/2008. rohs schurter ag eu directive rohs 2011/65/eu china rohs schurter ag the law sj / t 11363-2006 (china rohs) has been in force since 1 march 2007. it is similar to the eu directive rohs. reach schurter ag on 1 june 2007, regulation (ec) no 1907/2006 on the registration, evaluation, authorization and restriction of chemicals 1 (abbreviated as "reach") entered into force. micrositev-lock schurter ag v-lock system are based on a matching plug-dose combination. the connector is equipped with a notch intended for use with the latching cordset. the cord latching system prevents against accidental removal of the cordset.
3 power entry modules without line filter EC11 https://www.schurter.com /pg05 connectors dimensions [mm] screw-on mounting 3.3 57 67 6.4 s 32.5 26.6 4.8 46.2 10.4 32.2 36 31.6 ca. 52 2.3 5 r 6 r 4.7 r 2.8 0.8 45.7 31.7 r 2.6 0.10 57 0.10 3.6 0.05 r 2.95 0.10 46.5 0.05 5.25 snap-in mounting 50 s 32.5 26.6 4.8 46.2 1.9 32.2 36 31.6 ca. 52 2.3 r 4.7 r 2.8 45.7 2.15 31.7 r 2.6 0.05 r 2.95 46.5 0.05 +0.05 -0.10 +0.05 -0.10 diagrams line switch non-illuminated 1 2 pe' l n pe 2) 1) 1) line 2) load line switch illuminated 1 2 pe' l n pe 2) 1) 1) line 2) load all variants panel mounting panel thickness s [mm] illumination color internally wired v-lock order number snap-in 1.5 - l EC11.0001.201 snap-in 1.5 - EC11.0001.202 snap-in 1.5 l red l EC11.0021.201 snap-in 1.5 l red EC11.0021.202 snap-in 1.5 l green l EC11.0031.201 snap-in 1.5 l green EC11.0031.202
4 power entry modules without line filter EC11 https://www.schurter.com /pg05 connectors panel mounting panel thickness s [mm] illumination color internally wired v-lock order number snap-in 2 - l EC11.0001.301 snap-in 2 - l l EC11.0001.301.21 snap-in 2 - EC11.0001.302 snap-in 2 l red l EC11.0021.301 snap-in 2 l red EC11.0021.302 snap-in 2 l green l EC11.0031.301 snap-in 2 l green EC11.0031.302 snap-in 2.5 - l EC11.0001.401 snap-in 2.5 - EC11.0001.402 snap-in 2.5 l red l EC11.0021.401 snap-in 2.5 l red EC11.0021.402 snap-in 2.5 l green l EC11.0031.401 snap-in 2.5 l green EC11.0031.402 screw - - l l EC11.0001.001.21 screw - - EC11.0001.002 screw - l red l EC11.0021.001 screw - l red EC11.0021.002 screw - l green l EC11.0031.001 screw - l green EC11.0031.002 most popular. availability for all products can be searched real-time: https://www.schurter.com/en/stock-check/stock-check-schurter packaging unit 25 pcs accessories description wire harness wire harness for schurter products assorted covers rear cover 0859.0076 cord retaining kits cord retaining strain relief flat head, h 4700.0008
5 power entry modules without line filter EC11 https://www.schurter.com /pg05 connectors mating outlets/connectors category / description connector overview complete iec connector c19, rewireable, straight 4795 iec connector c19, rewireable, angled 4790 iec connector c19, rewireable, straight 0104u connector further types to EC11 power supply cord overview complete cord sets 10 a, north america, 3.0 m, connector iec c13, sjt 3x18 awg, transparent 4300.0920 cord sets 16 a, europlug, 2.5 m, connector iec c19, h05vv-f3g1.5, black 6004.0395 cord sets 16 a, interconnection, 1.0 m, connector iec c19, h05vv-f3g1.5, black 6020.0392 cord sets 16 a, interconnection, 2.0 m, connector iec c19, h05vv-f3g1.5, black 6020.0394 cord sets 16 a, north america, 2.5 m, connector iec c19, sjt 3x14 awg, black 6009.5195 power supply cord further types to EC11 mating outlets/connectors shuttered power cord overview complete overview power cord with iec appliance connector c19, v-lock, straight vac19ks power cord further types to EC11 the specifications, descriptions and illustrations indicated in this document are based on current information. all content is subject to modifications and amendments. information furnished is believed to be accurate and reliable. however, users should independently evaluate the suitability and test each product selected for their own applications. 08.01.2018
|
